You don’t need to own the latest car models which you see in car magazines to drive a brand new and luxurious looking vehicle everyday. Here are very easy and very simple tips to help you remove rust from your car and keep it looking fancy and shiny all the time.
- Start the process by wiping the rust area with a clean cloth. After doing so, scrape the loose paint then use a sand paper to rub the rust spot until you see the sound area of the original paint.
- After you have cleaned off the dust, you may apply your favorite rust remover by thoroughly wiping
the rust spot with a soft cloth. If you do not have your rust remover handy, you may use a fine paint brush to remove the dust from the spot. - Smooth on a layer of cellulose stopper using an old knife. Do this process very carefully in order to smoothen the affected area without leaving any excess rust particles. You may also use a medium grade sand paper to smoothen the affected surface until it completely looks like the surrounding area.
- Remember to shake thoroughly your touch up paint. You may stir it using a piece of thin wire. Afterwards, apply the paint quickly and smoothly. Make sure that you thoroughly overlap the paint onto the existing pain work then apply a second coat after 24 hours.
- When you’re searching for the perfect color match, the technique is to look under the car’s bonnet and look for the identification plate. In it, a trim code or a section marked paint will be found. Take note of this number when you head for the repair shop. Most repair shops have a color chart which this color corresponds to and this will give you the exact color which matches your original paint.
When doing your rust removal process, bear in mind that there are two areas in your car which are most vulnerable to rusting. These are the portion behind the wheels and the area lips of the wheel arches. To prevent rusting in these areas, always invest in good mud flaps.
You are sure to keep driving a brand-new looking car with these easy rust removal tips!
